SIPITRI® 2 Segment Climbing Triangle With a Sliding/Climbing Ramp

A two-segment Pikler-style climbing triangle with a climbing-and-sliding ramp.

The frame is 82.5 cm wide. Each of the two segments runs 68 cm long, hinged together so the triangle folds flat against a wall when it's not in use. The highest frame position sits 60 cm off the floor — low enough that a first fall from the top lands on a soft surface, high enough to feel like a real climb. Rungs are 3 cm thick and spaced 12 cm apart, which is the spacing a small hand grips reliably.

The ramp hooks over the frame at any height. One side is smooth for sliding down; flip it over and pegs run along the underside for climbing up. 117 cm long, 40 cm wide.

Birch plywood throughout, finished with water-based UV varnish. The packaging is plastic-free — cardboard and paper only. Max load 50 kg, which covers a toddler and an older sibling climbing together.

From 18 months. By age three or four, most children are using the ramp as a slide and the frame as a climbing wall at the same time. Certified to EN 71-1, EN 71-2, EN 71-3, EN 71-8, EN 71-9 · EU Toy Safety Directive 2009/48/EC · UKCA.